Note
Ensure to use a LAN straight cable.
●
Set up and connect equipment required for the network environment. You
●
cannot make such settings on this TV. Read the manual of the equipment.
If your modem has no broadband router functions, use a broadband router.
●
If your modem has broadband router functions but there are no vacant
●
ports, use a hub.
Ensure that the broadband routers and hubs are compatible with
●
10BASE-T / 100BASE-TX.
If you use the equipment compatible only with 100BASE-TX, category 5 or
●
later LAN cables are required.
Contact your Internet Service Provider (ISP) or telecommunications
●
company for further assistance regarding the network equipment.
Confirm the terms and conditions of the contracts with your Internet
●
Service Provider (ISP) or telecommunications company. Depending on the
contracts, additional fees may be charged or multiple connections to the
internet may be impossible.
Turn the TV off, and then on again when changing or making the network
●
connection again.
Network settings
Network Connection
Ensure the connections are completed before starting network setup.
Internet service
■
Quick setup - Wireless
1. Display the menu with
2. Select
Network
Confirm the encryption key, settings and position of your access point
●
before starting setup. For details, read the manual of the access point.
3. Select
Quick setup
When the LAN cable is connected, wired setup will be done
●
automatically.
4. Select your desired access point with
Available Wireless Networks are displayed automatically.
●
: Encrypted access point
For WPS(Push button)
●
Network connections
MENU
Network Connection
with
/
and press
- 57 -
with
/
and press
OK
to access
/
and press
OK
OK
to access
to access