Selecting Channel - Panasonic TX-L42ET60B User Manual

SCART cable
– AV1 (SCART) adaptor (supplied) is necessary when connecting to the
TV.
RF cable
SCART cable
Terrestrial terminal
RF cable
DVD Recorder / VCR
For VIERA Link connections
●
Functions
= Note =
External equipment and cables shown are not supplied with this TV.
●
Please also read the manual of the equipment being connected.
●
Keep the TV away from electronic equipment (video equipment, etc.) or
●
equipment with an infrared sensor, otherwise distortion of image / sound
may occur or operation of other equipment may be affected.
When using a SCART or HDMI cable, it is recommended to use fully wired
●
one.
Check the terminal type and cable plugs are correct when connecting.
●

Selecting channel

1. Select DVB or Analogue with
The selectable modes vary depending on the channels stored.
●
You can also select the mode pressing
●
control or INPUT/OK/HOLD for MENU button on the control panel of
the TV.
2. Select a channel with Channel Up / Down or numeric buttons
DVB channel position begin from number 1 upward. Analogue channel
●
position numbers are in the 0 - 99 range.
■
To select a channel using information banner
It is possible to confirm the channel name and programme information by
using the information banner before changing channels.
1. Display information banner with
VIERA Link "HDAVI Control™"
TV
if it is not displayed
- 15 -
Summary of VIERA Link
TV repeatedly on the remote