Viewing Teletext - Panasonic TX-L42ET60B User Manual

■
How to operate services
In all cases, it is possible to navigate the pages using buttons on the remote
control, but because the commands available must apply to all manufacturers
of digital equipment, some on-screen commands may not correspond exactly
to the remote control buttons.
To exit a digital text service
●
TEXT
= Note =
As soon as you switch to a digital channel with links to a digital text
●
service, software is downloaded in the background over air to enable the
teletext function. This means that when switching to a digital channel, you
should wait for approximately 5 seconds before pressing
allow the software to be downloaded. If you press
is complete, it will be ignored and you will have to press
the download is complete.
While navigating digital text service, you will find there is a short delay
●
when moving between pages while the page downloads. There is often a
prompt shown on the page (for example "Loading") to let you know that
this is happening.

Viewing Teletext

1. Switch to teletext with
Displays the index page (content varies depending on the
●
broadcasters).
Current / sub page numbers are displayed on the top left of the screen.
●
Time / date is displayed on the top right of the screen.
●
Colour bar is displayed on the bottom of the screen.
●
2. Select the page with numeric buttons,
(Coloured buttons)
To adjust contrast
●
1) Press MENU
2) Adjust with
To exit teletext
●
EXIT
TEXT
three times to display
/ and press OK to set
- 40 -
TEXT
TEXT before download
TEXT
/ or
Contrast
- this will
again when