Recording Motion Pictures - Panasonic HDC-TM10 Operating Instructions Manual

Recording
2
Recording
This unit records high definition images that are compatible with the AVCHD format.
≥ Use an SD card that can be used for motion picture recording. (l 14)
≥ Open the lens cover before turning on the power. (l 8)
:
∫ When selecting media
Select the menu. (l 19)
[MEDIA SELECT] # [Built-in Memory] or
[SD CARD]
1
Change the mode to
2
Open the LCD monitor.
You cannot start recording while the LCD
monitor is closed.
≥ For users who have
3
Select the media to record from
the menu.
Select whether to record motion pictures to
the SD card or the built-in memory.
≥ You cannot set the recording media for motion
pictures and still pictures separately.
4
Press the recording start/stop
button to start recording.
22
VQT2D12 (ENG)

Recording motion pictures

≥ While recording is in progress, the recording
will not stop even if the LCD monitor is closed.
5
∫ Screen indications in the
.
, proceed to step 4.
A Recording mode
B Remaining time left for recording
C Recording time elapsed
Press the recording start/stop
button again to pause recording.
recording mode
0h00m00s 0h00m00s 0h00m00s
HG R 1h20m R 1h20m R 1h20m
(When the remaining time is less than
1 minute, [R 0h00m] flashes red.)
Each time the unit is put into recording
pause, the counter display will be reset to
"0h00m00s".