Connecting To A Pc - Panasonic HDC-HS700 Operating Instructions Manual

With a PC
2
Setup
≥ Connect this unit to the PC after the software applications are installed.
≥ Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
1
Connect this unit to the AC adaptor.
≥ It is possible to use it connected to the PC with the batteries only.
≥ Connect with the AC adaptor when using the Conversion assist function.
2
Turn on the unit.
≥ This function is available in all modes.
3
Connect this unit to a PC.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
≥ The Smart wizard screen is automatically displayed when HD Writer AE 2.1 is installed.
≥ This unit is automatically recognised as an external drive of the PC. (l 121)
≥ When HD Writer AE 2.1 is not installed, a USB function selection screen will appear. Touch
[PC]. When you select an option other than [PC], reconnect the USB cable.
≥ When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html

Connecting to a PC

119
VQT2N56