Face Framing - Panasonic HDC-HS700 Operating Instructions Manual

[NAME DISPLAY]
When a registered person is detected by face recognition during recording, the name
registered for that person is displayed.
≥ Change the mode to
: [RECORD SETUP] # [NAME DISPLAY] # desired number
[OFF]/[1]/[2]/[3]
≥ Displayed name will disappear after a while.
≥ It is displayed according to the registration order setting from the first person.
≥ This function is not displayed during face-to-face recording or playback mode.

[FACE FRAMING]

Detected faces appear with frames.
≥ Change the mode to
: [RECORD SETUP] # [FACE FRAMING] # desired setting
[OFF]:
Cancel the setting.
[PRIMARY]:
Only the prioritised face framing is displayed.
[ALL]:
All face detection framings are displayed.
≥ Up to 15 frames are indicated. Larger faces and faces nearer to the centre of the screen take
preference over others. When [FACE RECOG.] is [ON], registered people are given priority.
∫ Prioritised face framing
Prioritised face framing is displayed in orange. Focus and adjustment of brightness will be
performed against the prioritised face framing.
≥ Prioritised face framing is only displayed in Intelligent auto mode.
≥ Focus will be set to prioritised face framing when the
recording still pictures. Prioritised face framing will turn to green when the focus is set.
[AGS]
If the unit continues to be tilted upside down from the normal horizontal position while
recording motion pictures, it is automatically put into recording pause.
≥ Change the mode to
: [RECORD SETUP] # [AGS] # [ON]
≥ The AGS function may activate and cause the unit to pause the recording if you are
recording a subject right above or right below you.
64
VQT2N56
or .
or .
.
button is pressed halfway when