Discs — Basic Play - Panasonic SC-VK62D Operating Instructions Manual

Discs — Basic play
1
2
Check the disc location
Press [DISC CHECK] during play.
Press again to close the trays.
• To check the location of the 12 cm discs.
• If a disc is being played, the corresponding tray will not open.
• Do not remove or insert disc(s) during a disc check.
•
Do not pull out the trays during a disc check.
Stop
Press [L, STOP] during play.
The position is memorized while
"RESUME" is on the display.
• Press [:, DVD/CD] to resume.
• Press [L, STOP] again to clear
the position.
Note
RQT8092
•
Discs continue to rotate while menus are displayed. Press [L] when you finish to preserve the unit's motor and your television screen.
10
•
Total title number may not be displayed properly on +R/+RW.
10
Press [OPEN/CLOSE c] to open the tray.
The unit comes on.
• To load discs in other trays, press [1]–[5] to select the tray and press
[OPEN/CLOSE c] to open the tray.
• You can load up to 5 discs (one per tray).
• Load double-sided discs so the label for the side you want to play is facing up.
• Remove the disc from its cartridge before use.
RAM
Do not pull or push the tray with your hand.
Press [OPEN/CLOSE c] to close the tray.
Skip/Search/Slow-motion play
To skip: Press [g, REW/ 4 4 4 4 4 ] or [f, 3 3 3 3 3 /FF].
•
To search: Hold down [g, REW/4 4 4 4 4 ] or [f, 3 3 3 3 3 /FF] during play.
•
To play in slow-motion: Hold down [g, REW/4 4 4 4 4 ] or [f, 3 3 3 3 3 /FF] during pause.
•
• Slow motion play is for forward direction only.
VCD
•
Search/slow motion play speed increases up to 5 steps.
Change a disc
in another tray
Press [DISC CHANGE c] and
then [1]–[5].
Press [DISC CHANGE c] again to
close the tray.
• You can also remove a disc while
another is playing.
• If you select a disc which is being
played, play stops and the tray
opens.
3
Press [1]–[5] to play
the disc.
You can also press
[:, DVD/CD] if the current
disc is your desired disc.
:, DVD/CD