Focus Lock Recording - Konica Minolta Digital Revio KD-210Z User Manual

Recording using the viewfinder
Recording can be made using only the viewfinder (without the LCD monitor).
q Set the main switch on the top of the cam-
era to and press the DISPLAY button.
The LCD monitor will turn off.
w The viewfinder is used for recording.
Note: When turning the main switch to the OFF position while the LCD monitor is off, the LCD monitor will remain
off when the recording is performed the next time. To record using the LCD monitor, press the DISPLAY
button.

Focus Lock Recording

Use the following procedure if the subject to record is not in the center of the viewfinder.
q Position the subject so that it falls within the
focus frame of the viewfinder and lightly press
the shutter button (halfway).
The viewfinder LED will light green and the
focus position will be locked.
Note:
* Exposure is locked when the viewfinder LED is lit green.
* Releasing the finger from the shutter button after locking
the focus position will cancel the focus lock. In this case,
the focus cannot be re-locked.
w While continuing to hold the shutter button
down lightly (halfway), re-position the sub-
ject for the desired composition and gently
press the shutter button down completely to
record.
q
q
w
MENU
2
DISPLAY
25