Table of Contents
Advertisement
4
3
CD play mode function for MP3
Remote control only
Preparation: Press [: CD] and then [L CLEAR].
1
Press [PLAY MODE] to select the desired mode.
Every time you press the button:
→
→
ALL-DISC
1-SONG
1-DISC
↑
ALL-DISC:
Plays all loaded discs in succession from the
selected disc to the final disc \ .
1-SONG:
Plays one selected track on the selected disc.
1-DISC:
Plays one selected disc.
(The original display is restored in about 2 seconds.)
2
Press [DISC] and
(within 10 seconds)
disc.
The CD starts.
3
When you selected "1-SONG" in step 1
Press [SHIFT] µ [ALBUM (
Play starts from the first track of the selected album.
4
When you selected "1-SONG" in step 1
Press [f 4] or [ g 3] to select a track and press
[: CD].
Play starts.
To stop play
Press [L CLEAR].
When playback ends
The current play mode will be retained in memory until it is changed
even if the unit is turned off.
\
Final disc
For example, if play starts from disc 4, disc 3 will be the "final disc".
Order of progression: Disc 4z5z1z2z3
Note
You cannot use program mode together with CD Play Mode function.
4
[1]–[5] to select the
or
)] to select the album.
SHIFT
Program play for MP3
You can program up to 24 tracks.
Remote control only
Preparation:
1. Turn the television on, select the video input with the television
input switch.
2. Select the desired disc (A page 6)
3. Press [L CLEAR].
1
An album list appears.
Press [PROGRAM].
2
Press [8 , 9] to select an album and press [ENTER].
3
A track list appears.
Press [8 , 9] to select a track and press [ENTER] to
add it to the program.
Repeat this step to program other tracks.
To program from another album
1. Press [SHIFT] + [
].
2. Do steps 2~3.
4
Press [: CD] to start play.
To exit program mode
Press [PROGRAM] in the stop mode. You can replay your
program by pressing [PROGRAM] then [: CD].
You can do the following while "P" is displayed
•
To check program contents
Press [f 4] or [ g 3].
Every time you press the button, the track number and program
order are displayed.
•
To add to the program
While checking program contents
Press [ENTER].
Do steps 2-3.
•
To clear all tracks
Press [L CLEAR].
Note
•
You cannot program more than one disc for MP3.
•
You cannot program CD-DA tracks together with MP3 tracks.
•
The program memory is cleared when you change a disc or open
the CD tray.
4
11
RQT7704
Hide quick links:
Advertisement
Table of Contents
