Seagate Savvio ST973401LC Product Manual page 25

want to configure the cache to provide large volumes of sequential data in a non-repetitive manner. In this
case, the ability of the cache to "look ahead" to the next contiguous segments of sequential data is a good
thing.
The Performance Mode (PM) bit controls the way the drive switches the cache buffer into different modes of
segmentation. In "server mode" (PM bit = 0), the drive can dynamically change the number of cache buffer
segments as needed to optimize the performance, based on the command stream from the host. In "desktop
mode" (PM bit = 1), the number of segments is maintained at the value defined in Mode Page 8, Byte 13, at all
times (unless changed by using a Mode Select command). For additional information about the PM bit, refer to
the Unit Attention Parameters page (00h) of the Mode Sense command (1Ah) in the SCSI Interface Product
Manual, part number 75789509.
Savvio SCSI Product Manual, Rev. C 15