Reliability; Formatted Capacities; Programmable Drive Capacity; Factory Installed Accessories - Seagate Savvio ST973401LC Product Manual

3.4

Reliability

• Mean time Between Failure (MTBF) of 1,400,000 hours
• LSI circuitry
• Balanced low mass rotary voice coil actuator
• Incorporates industry-standard Self-Monitoring, Analysis and Reporting Technology (S.M.A.R.T.)
• 5-year warranty
3.5

Formatted capacities

Standard OEM models are formatted to 512 bytes per block. The sector size is selectable at format time. Users
having the necessary equipment may modify the data block size before issuing a format command and obtain
different formatted capacities than those listed.
To provide a stable target capacity environment and at the same time provide users with flexibility if they
choose, Seagate recommends product planning in one of two modes:
1. Seagate designs specify capacity points at certain sector sizes that Seagate guarantees current and future
products will meet. We recommend customers use this capacity in their project planning, as it ensures a
stable operating point with backward and forward compatibility from generation to generation. The current
guaranteed operating points for this product are:
ST936701
Sector Size Decimal
512 71,687,372
514 70,512,692
520 70,197,546
522 68,914,176
524 68,766,592
2. Seagate drives also may be used at the maximum available capacity at a given sector size, but the excess
capacity above the guaranteed level will vary between other drive families and from generation to genera-
tion, depending on how each sector size actually formats out for zone frequencies and splits over servo
bursts. This added capacity potential may range from 0.1 to 1.3 percent above the guaranteed capacities
listed above. Using the drives in this manner gives the absolute maximum capacity potential, but the user
must determine if the extra capacity potential is useful, or whether their assurance of backward and for-
ward compatibility takes precedence.
3.5.1

Programmable drive capacity

Using the Mode Select command, the drive can change its capacity to something less than maximum. See the
Mode Select Parameter List table in the SCSI Command Reference Manual. Refer to the Parameter list block
descriptor number of blocks field. A value of zero in the number of blocks field indicates that the drive shall not
change the capacity it is currently formatted to have. A number in the number of blocks field that is less than
the maximum number of LBAs changes the total drive capacity to the value in the block descriptor number of
blocks field. A value greater than the maximum number of LBAs is rounded down to the maximum capacity.
3.6

Factory installed accessories

OEM Standard drives are shipped with the Savvio SCSI Installation Guide, part number 100293076, and the
Safety and Regulatory Agency Specifications, part number 75789512 (unless otherwise specified).
Savvio SCSI Product Manual, Rev. C
ST973401
Hex Decimal
445DCCC 143,374,744
433F034 141,025,384
42F212A 140,395,092
41B8C00 137,828,352
4194B80 137,577,184
Hex
88BB998
867E068
85E4254
8371800
83342E0
9