Product Specifications - LG 15LC1R Series Owner's Manual

Picture OK &
No sound
No output from one
of the speakers
Unusual sound
from inside the
product
The signal is out of
range.
Vertical bar or
stripe on back-
ground &
Horizontal Noise &
Incorrect position
Screen color is
unstable or single
color

Product Specifications

Product Specifications
Power Requirement/
Power Consumption
Dimensions
(Width x Depth x Height)
Weight (Net)
Television System
Programme Coverage
External Antenna Impedance
* The specifications shown above may be changed without prior notice for quality improvement.
The audio function does not work.
• Press the VOL (or Volume) button.
• Sound muted? Press MUTE button.
• Try another channel. The problem may be with the broadcast.
• Are the audio cables installed properly?
• Adjust Balance in menu option.
• A change in ambient humidity or temperature may result in an unusual
noise when the product is turned on or off and does not indicate a fault with
the product.
There is a problem in PC mode.
(Only PC mode applied)
• Adjust resolution, horizontal frequency, or vertical frequency.
• Check it whether the signal cable is connected or loose.
• Check the input source.
• Work the Auto configure or adjust clock, phase, or H/V position.
• Check the signal cable.
• Reinstall the PC video card.
15LC1R * : AC100-240V~ 50/60Hz 0.8A / 40W
20LC1R * : AC100-240V~ 50/60Hz 1.2A / 65W
23LC1R * : AC100-240V~ 50/60Hz 1.4A / 120W
15LC1R * : 377.6mm x 242.8mm x 394.5mm
14.9inches x 9.6inches x 15.5inches
20LC1R * : 492.2mm x 272.8mm x 483.3mm
19.3inches x 10.7inches x 19.0inches
23LC1R * : 611.0mm x 273.0mm x 485.0mm
24.0inches x 10.7inches x 19.0inches
15LC1R * : 5.6kg (12.3lbs)
20LC1R * : 8.7kg (19.1lbs)
23LC1R * : 10.4kg (22.9lbs)
PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L'
VHF: E2 ~ E12, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
75 Ω