Operating other equipment
Optional connection for set top box
SCART cable
(not included)
You can change the video signal output from the SCART (AV) terminal from "RGB" to either "S-Video" or
"Video" to suit the type of television you are using.
• Select "S-Video/YPbPr" or "Video/YPbPr" from QUICK SETUP (\ page 7).
• Set "Video Mode" to "Off" (\ page 27, "HDMI" tab, Operations Guide).
• This connection will also enable you to play audio from your television through your home theater system.
Refer to "Operating other equipment" (\ page 35, Operation Guide).
• Do not use the HDMI cable when you use the scart cable for the connection.
8
RQT8043
Set top box
Television
(not included)
(not included)
Rear panel of
this main unit
SCART cable (not included)
• To listen to the sound from the television, select the appropriate
audio out (example: Monitor) on the television.
Sound from the television
• Press [EXT-IN] (\ page 37, Operations Guide) to select the
"AV" audio input on the remote control.