Power Management; Screen Blank State; Sleep (Standby) State - Lenovo IdeaPad S206 Hardware Maintenance Manual

Power management

Note: Power management modes are not supported for APM operating system.
To reduce power consumption, the computer has three power management
modes: screen blank, sleep (standby), and hibernation.

Screen blank state

If the time set on the "Turn off monitor" timer in the operating system expires,
the LCD backlight turns off. You can also turn off the LCD backlight by pressing
To end screen blank state and resume normal operation, press

Sleep (standby) state

When the computer enters sleep (standby) state, the following events occur in
addition to what occurs in screen blank state:
• The LCD is powered off.
• The hard disk drive is powered off.
• The CPU stops.
Putting your computer into sleep state
If you will be away from your computer for only a short time, put the computer
into sleep state.
When the computer is in sleep state, you can quickly wake it to resume use, and
bypass the startup process.
To put the computer into sleep state, click
menu.
To wake the computer, do one of the following.
• Press the power button.
• Press any key on the keyboard.
Also, in the following event, the computer automatically returns from sleep
(standby) state and resumes the operation:
• The time set on the resume timer elapses.
Note: The computer does not accept any input immediately after it enters sleep
(standby) state. Wait a few seconds before taking any action to reenter operation
mode.
.
Related service information
and select Sleep from the Start
.
25