Panasonic SC-PMX2DB Operating Instructions Manual page 12

DAB (continued)
DAB operation DAB operation
Press [DAB/FM/MUSIC PORT] repeatedly to enter
1
DAB mode.
The unit comes on.
Note
"Scan Failed." appears if no stations are memorized. If this
occurs, adjust the antenna and try Auto scanning or change the
Auto scan frequency range. ( ➡ page 13)
2 Press [PLAY MODE] to select "STATION TUNE".
Each time you press the button:
"STATION TUNE"
3 Press [ /4/1] or [ /¡/¢] to select a station.
The station name changes in alphanumeric order.
DAB Auto Scan DAB Auto Scan
Press and hold [PLAY MODE] until "DAB Auto Scan"
appears.
When a frequency is tuned by Auto scanning on this unit,
the ensemble corresponding to the frequency is displayed
for approximately 2 seconds.
Note
• When updating memory with Auto scan, preset stations are not
erased or changed.
• When a frequency cannot be received, the previous memory is
restored.
• Total stations received is displayed for approximately 2 seconds.
12
Numeric
buttons
"PRESET TUNE"
Presetting Presetting
Presetting channel
Up to 20 channels can be set.
Press [ /4/1] or [ /¡/¢] to select a station.
1
2 Press [PROGRAM].
3 Press the numeric buttons to select a channel.
4 To preset more stations, press [PLAY MODE] to
select "STATION TUNE" and then repeat steps 1 to 3.
Note
You cannot preset stations when the station is not broadcasting or
when you are selecting a secondary service.
Selecting a preset channel
1 Press [PLAY MODE] to select "PRESET TUNE".
2 Press [ /4/1] or [ /¡/¢] or numeric buttons
to select a channel.
Listening to the secondary service Listening to the secondary service
Press the [DAB SECONDARY] to select the secondary
service.
" " is displayed if there is a secondary service broadcast.
The secondary services are selected each time the button
is pressed. The primary service is returned to after the last
secondary service.
Display Display
Press [DISPLAY] to select the display.
Each time you press the button: