Getting Started - Panasonic SC-PM4DB Operating Instructions Manual

Cd stereo system
Table of Contents

Advertisement

Getting started

Step 1
Step 1
- Making the connections
- Making the connections
Connect the AC mains lead only after all other connections have been made.
1
Connect the speaker cables.
Red (ª)
Black (·)
Incorrect connection can damage the unit.
3
Connect the FM antenna.
Tape the FM antenna to a wall or column, in a position
4
with least amount of interference.
Red (ª)
Black (·)
Adhesive tape
FM antenna
2
Connect the DAB "T" antenna
The cross bar of the T should be kept fi rmly stretched.
Find a position with good reception.
There is a function on the unit to check signal quality.
Be sure to fully
tighten the screw.
For best reception
A DAB outdoor antenna is recommended
(refer to page 5).
To household
mains socket
4
Connect the AC mains lead.
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 3 BEFORE
CONNECTION.
The included AC mains lead is for use
with this unit only. Do not use it with other
equipment.
Insertion of connector
Appliance inlet
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front
part of the connector may jut out as shown
in the drawing. However there is no problem
using the unit.
Adhesive tape
Connector

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents