Connecting The Wireless Network - LG LCD TV / LED LCD TV / PLASMA TV Owner's Manual

NOTE
y
If you want to access the Internet directly on
your TV, the broadband internet connection
should always be on.
y
If you cannot access the Internet, check the
network conditions.
y
When you use Network Setting, check the
LAN cable or check if the DHCP in the router
turns on.
y
If you do not complete the network settings,
the network may not work properly.
COMPONENT
IN 1
WIRELESS
CONTROL
AV IN 1
OPTICAL DIGITAL PTICAL DIGIT TICAL DIGIT ANTENNA/ ANTENNA ANTENNA
LAN RGB IN (PC) AUDIO IN AUDIO IN AUDIO IN
AUDIO OUT CABLE IN
(RGB/DVI)

Connecting the wireless network

(Unnecessary this setup for 47/55/60LW95 ** )
The LG Wireless LAN for Broadband/DLNA Adap-
tor, which is sold separately, allows the TV to con-
nect to a wireless lan network.
The network configuration and connection method
may vary depending on the equipment in use
and the network environment. Refer to the setup
instructions supplied with your access point or
wireless router for detailed connection steps and
network settings.
Setting up the AP (Access Point) or the wireless
router is required before connecting the TV to the
network.
@
AV IN 2
AUDIO / VIDEO
COMPONENT IN 2 H/P
AUDIO / Y P P
B R
Internet
NOTE
y
For enjoying pictures, music, or video stored
in the PC using the router, the use of wired
port in the router is recommended.
y
When the wireless port of the router is used,
there may be restrictions for some functions.
y
It is recommended that an Access Point
(AP) is installed more than 1 m away from
the TV. If the AP is installed closer than 1
m, the magic motion remote controller may
not perform as expected due to frequency
interference.
45
ENTERTAINMENT
LAN WAN
Router
ETHERNET
Cable modem