40
WATCHING TV
Using additional options
Adjusting aspect ratio
Resize an image to view at its optimal size by
pressing RATIO while you are watching TV.
NOTE
y
You can also change the image size by
pressing Q. MENU or accessing Aspect
Ratio in the PICTURE menus.
y
For Zoom Setting, select 14:9, Zoom
and Cinema Zoom in Ratio Menu.
After completing Zoom Setting, the dis-
play goes back to Q.Menu.
You can only select 4:3, 16:9 (Wide),
14:9, Zoom/Cinema Zoom in Component
mode.
You can only select 4:3, Original, 16:9
(Wide), 14:9, Zoom/Cinema Zoom in
HDMI mode.
You can only select 4:3, 16:9 (Wide) in
RGB-PC, HDMI-PC mode only.
y
In DTV/HDMI/Component (over 720p)
mode, Just Scan is available.
y
In DTV(over 576p) mode, Just Scan is
available in Austalia only.
-
16:9: Resizes images to fit the screen width.
-
Just Scan: Displays video images in the
original size without disappearing parts at the
edge of the image.
Just Scan
NOTE
y
If you select Just Scan, you may see
image noises at the edge of the original
signal.
-
Original: When your TV receives a wide
screen signal it will automatically change to the
picture format broadcast.
or
Original
-
Full Wide(Only DTV): When TV receives the
wide screen signal,it will lead you to adjust
the picture horizontally or vertically, in a
linear proportion,to fill the entire screen fully.
4:3 and 14:9 video is supported in full screen
without any video distortion through DTV
input.
or
Full Wide
-
4:3: Resizes images at the standard 4:3 with-
out distortion.
Original
Full Wide