EXTERnAL EQUIPMEnT SETUP
VCR SETUP
avoid picture noise (interference), allow adequate distance between the VCR and TV.
To
Connecting with a RF Cable
Connect the
➊
Connect the terrestrial antenna cable to the
➋
PLAy
Press the
➌
Connecting with a RCA Cable
Connect the
➊
(Video = yellow, Audio Left = white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR
➋
owner's manual.)
AV3
Select
input source using the
➌
nOTE
►
If you have a mono VC R, connect the audio cable from the VCR to the
L/MOnO
jack of the TV.
GB-18
AnT OUT
socket of the VCR to the
AnT In
button on the VCR and match the appropriate channel between the TV and VCR for viewing.
➊
AUDIO/VIDEO
jacks between TV and VCR. Match the jack colours
InPUT
button on the remote control.
AnTEnnA In
socket on the TV.
socket of the VCR.
Terrestrial
Wall jack
➋
Terrestrial Antenna
AUDIO
➊