Dvd Setup - LG LCD TV / LED LCD TV Owner's Manual

DVD SETUP

Connecting with a Component Cable
Connect the video outputs (Y, P
➊
VIDEO
jacks on the TV.
Connect the audio outputs of the DVD to the
➋
on the TV.
Turn on the DVD player, insert a DVD.
➌
Component
Select input source using the
➍
control.
Refer to the DVD player's manual for operating instructions.
➎
Component Input Ports
To achieve better picture quality, connect a DVD player to the component input
ports as shown below.
Component ports on the TV
Video output ports
on DVD player
Connecting the HDMI Cable
Connect the HDMI output of the DVD to the
➊
HDMI IN 4
jack on the TV.
HDMI1 HDMI2 HDMI3
Select , ,
➋
remote control.
Refer to the DVD player's manual for operating instructions.
➌
NOTE
►
The TV can receive video and audio signals simultaneously when using a HDMI cable.
►
If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
►
Check that your HDMI cable is version 1.3 or higher. If the HDMI cables don't support HDMI
version 1.3, flickering or no screen display can result. Please use the latest cables that
support at least HDMI version 1.3.
COMPONENT IN
, P ) of the DVD to the
B R
COMPONENT IN AUDIO
INPUT
button on the remote
Y PB PR
Y PB PR
Y B - Y R - Y
Y Cb Cr
Y Pb Pr
HDMI/DVI IN 1 HDMI IN 2
,
HDMI4
or input source using the
jacks
➊
HDMI IN 3
, or
INPUT
button on the
➋
➊
GB-19