Table of Contents
Advertisement
DAB
(continued)
DAB reception method on this unit
Depending on the region there is a difference between
broadcast frequency and stations broadcast along
the same frequency. For this reason, a memory of
receivable stations should first be created and then
selected from those memorized stations as the reception
method.
DAB Auto Scan
This function searches for currently receivable stations
and inputs them into unit memory.
When DAB is selected for the first time, this function
starts automatically.
Note
Even if the station is stored into memory, some stations
may not broadcast depending on the time of day etc. If
this occurs, "NO SERVICE" is displayed.
Station Memory Updating
When there is a station name change, or a new station
begins broadcasting, the unit memory is automatically
updated when:
•
The previous station name is displayed by selecting
"STATION TUNE".
•
One of the stations already broadcasting on the
same frequency with the new station is displayed by
selecting "STATION TUNE".
Note
•
Deleting stations that are no longer broadcasting is not
automatic. If you want to delete a station, perform Auto
scan again and the new memory is created.
•
When a new frequency begins broadcasting, stations
on the new frequency are not automatically added to
memory. Perform Auto scan to add them to memory.
Also, you may need to change the Auto scan range if
the new frequency is outside the factory set Auto scan
range (➡ page 12).
STATION TUNE
You can select stations from the memory created as
shown on page 9 in alphanumeric order. You can easily
select your favourite stations by using presets (➡ page 11).
10
DAB operation
1 Press [DAB/FM] to enter DAB mode.
The unit comes on.
Note
"SCAN FAILED." appears if no stations are memorized.
If this occurs, adjust the antenna and try Auto scanning
or change the Auto scan frequency range (➡ page 12).
2 Press [PLAY MODE] to select "STATION TUNE".
Each time you press the button:
"STATION TUNE"
3 Press [u/t] or [y/i] to select a station.
The station name changes in alphanumeric order.
DAB Auto scan
Press and hold [PLAY MODE] until "DAB Auto Scan"
appears.
When a frequency is tuned by Auto scanning on this
unit, the ensemble corresponding to the frequency is
displayed for approximately 2 seconds.
Note
•
When updating memory with Auto scan, preset
stations are not erased or changed.
•
When a frequency cannot be received, the previous
memory is restored.
•
Total stations received is displayed for approximately
2 seconds.
DAB/FM
PLAY MODE
If you are selecting DAB
for the first time, "DAB Auto
Scan..." is displayed, stations
that are currently receivable
are memorized.
When a frequency is tuned
the ensemble corresponding
to the frequency is displayed.
The station first in
alphanumeric order is
broadcast.
"PRESET TUNE"
PLAY MODE
Hide quick links:
Advertisement
Table of Contents
