Mhz Mode; Direct Frequency Entry - Kenwood TM-481A Instruction Manual

MH M
Z ODE
If the desired operating frequency is far away from the
current frequency, it is quicker to use the MHz Tuning
Mode.
To adjust the MHz digit:
1 While in VFO or Call Mode, press [MENU].
• The MHz digit blinks.
4
2 Turn the Tuning control to select the desired MHz
value.
3 Press any key to set the selected frequency and return
to normal VFO Mode.
4 Continue adjusting the frequency as necessary, using
the Tuning control or Mic [UP]/[DWN].
16
D F E
IRECT REQUENCY NTRY
In addition to turning the Tuning control or pressing Mic
[UP]/[DWN], there is another way to select the frequency.
When the desired frequency is far away from the current
frequency, you can directly enter a frequency using the
Mic keypad (keypad models only).
1 Press [VFO].
• You must be in VFO mode to make a direct frequency
entry.
2 Press the Mic PF key assigned the ENTER function
{page 59}.
3 Press the numeric keys ([0] to [9]) to enter your
desired frequency.
• Pressing Mic Enter fills all remaining digits (the digits
you did not enter) with 0 and completes the entry. For
example, to select 145.000 MHz, press [1], [4], [5] and
press Mic Enter to complete the entry.
• If you want to revise the MHz digits only, leaving the kHz
digits as they are, press Mic [VFO] in place of Mic Enter.