[FACE FRAMING]
Detected faces appear with frames.
: [RECORD SETUP] # [FACE FRAMING] # desired setting
MENU
[PRIMARY]:
Only the prioritised face framing is displayed.
[ALL]:
All face detection framings are displayed.
[OFF]:
Cancel the setting.
≥ Up to 15 frames are indicated. Larger faces and faces nearer to the centre of the screen
take preference over others. When [FACE RECOG.] is [ON], registered people are given
priority.
∫ Prioritised face framing
Prioritised face framing is displayed as orange frames. Focus and adjustment of brightness
will be performed against the prioritised face framing.
≥ Prioritised face framing is only displayed with Portrait Mode in the Intelligent Auto Mode.
≥ The white frame is for face detection only.
≥ Focus will be set to prioritised face framing when the
recording still pictures. Prioritised face framing will turn to green when the focus is set.
[AUTO SLOW SHTR (2D)]
You can record bright pictures even in dark places by slowing the shutter speed.
≥ Switch to Manual Mode. (l 73)
: [RECORD SETUP] # [AUTO SLOW SHTR (2D)] # [ON]
MENU
≥ The shutter speed is set to 1/25 or more depending on the surrounding brightness.
≥ This function cannot be used when using the 3D Conversion Lens (optional).
≥ This function cannot be used in Still Picture Recording Mode.
≥ When the shutter speed becomes 1/25, the screen may be seen as if frames are missed
and afterimages may appear.
64
VQT3Y48
button is pressed halfway when