Wireless Connection Settings - Panasonic Viera TX-P42ST50E Operating Instrucktion

4
Select [Connection Test] and access to test
Connection Test Access
Connection Test
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.

Wireless connection settings

This setting is for the wireless network connection.
●
Confirm the encryption key, settings and positions of your access point before starting setup. For details, read the
manual of the access point.
1
Select [Network Connection] and set to [Wireless]
Connection Test
Network Connection Wireless
Wireless Network Settings
IP/DNS Settings
Network Link Settings
Software Update
New Software Message On
Network Status
2
Select [Wireless Network Settings]
Connection Test
Network Connection Wireless
Wireless Network Settings Access
IP/DNS Settings
Network Link Settings
Software Update
New Software Message On
Network Status
3
Select your desired access point
Available Wireless Networks
No. Network Name(SSID) Wireless type
1 Access Point A 11n(2.4GHz)
2 Access Point B 11n(5GHz)
3 Access Point C 11n(5GHz)
●
To search access points again
(blue)
4
Access the encryption key input mode
Encryption Key Setting
Connection will be made with the following settings:-
Network Name(SSID) : Access Point A
Security type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
select
access
●
Performs automatic testing of the network connection for the TV. (It takes a
while to test.)
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections. And then try again.
select
access / store
select
access
●
When the access point is already set, [Current Settings] screen will be
displayed.
To change the settings, select [No] on this screen and go to the next step.
select
Status
access
: Encrypted access point
●
For the information of the
highlighted access point
●
If the selected access point is not encrypted, the confirmation screen will be
displayed. It is recommended to select the encrypted access point.
● For [WPS(Push button)] (p. 18)
(red)
●
For [WPS(PIN)] (p. 80)
(green)
●
To set manually (p. 80)
(yellow)
79