Troubleshooting - LG POD200 Owner's Manual

14

Troubleshooting

5
Troubleshooting
Troubleshooting
Symptom
No power.
The power is
on, but the unit
does not work.
No picture
on other
connected
display devices,
TV etc.
No sound.
5
The unit does
not start
playback.
DP650-P.AGBRLLB_ENG_7243_ver2.indd 14
Cause
• The power cord is disconnected. • Plug the power cord into the wall
• Disc is not inserted.
• The TV is not set to receive the
signal from the unit.
• The video cable is not
connected securely.
• The volume is set to minimum.
• The equipment connected with
the audio cable is not set to
receive the signal from the unit.
• The AUDIO options are set to
the wrong position.
• The earphone jack is connected
to the unit.
• The disc is inserted upside
down.
• The disc surface is dirty by
Fingerprints and dust on the
disc.
• An unplayable disc is inserted.
• The rating level is set.
Solution
outlet securely.
• Insert a disc.
• Select the appropriate video input
mode on the TV.
• Connect the video cable securely.
• Use the volume controller to adjust
the volume.
• Select the correct input mode of the
audio amplifier.
• Set the AUDIO settings to the correct
position.
• Seperate the earphone jack from the
unit.
• Ensure the disc label is upwards.
• Clean the disc with a clean, soft, lint-
free cloth, wipe the disc outwards
from the center. (Do not use strong
solvents such as alcohol, benzine,
thinner, etc)
• Insert a playable disc. (Check the disc
type and regional code.)
• Change the rating level.
11. 10. 24 10:44