Table of Contents
Advertisement
1
Power Switch
2
External GPS antenna
connector (MMCX
type)
3
Battery charging LED
4
Touch screen
5
SD/MMC card slot
6
Volume up/down
7
Car holder slots
8
USB / Power connector Use the supplied USB cable to connect the Compasseo to your computer
9
Earphone Jack
10
Battery lock switch
11
Reset button
12
Speaker
To make the most of your Packard Bell Compasseo, download extra maps, get the latest firmware and
purchase accessories, make sure you visit the Packard Bell Website regularly on
Slide to power on or off the device.
If your car has a heat reflective/thermal windscreen, you may need to use
an external antenna to get better GPS reception.
Indicates the status of battery.
Read status and information on the screen. Tap the screen to enter
information
and navigate through the applications.
Insert an SD/MMC card to read maps, music, photos.
Adjust the volume.
Use to position your device in the car holder kit.
and exchange files or charge the battery, or connect the supplied car
adapter cable and plug the other end into the cigarette lighter to charge
the battery.
Connect earphones.
Use this switch to cut all power to the device. Note that this also resets
the device's memory. You will have to perform the first start process again
(calibrate screen, settings, acquire GPS connection, etc.).
Restart your device in case it stops responding or becomes unstable.
Listen to route guidance instructions or enjoy your music.
6
www.packardbell.com
!
Advertisement
Table of Contents
