Cleaning And Maintenance - LG WT-R854 Owner's Manual

30
C
leaning and Maintenance
Cold water washing
• If you always use COLD water, we recommend that a WARM or HOT wash be used at a
regular intervals e.g. every 5th wash should be at least a WARM one.
When you have finished
• Turn off taps to prevent the chance of flooding should a hose burst.
• Always unplug the power cord after use.
When water supply into the tub is not clean or the filter is clogged with particles (such as sand), clean the
filter in the inlet valve occasionally.
(The figure of power cord and water tap may vary according to the country)
To Clean the Filter in the Inlet Valve
1
Close the tap before turning off the power.
Select both Hot/Cold and then press the
[START/PAUSE] button to remove water
from the machine completely.
3 After removing the water supply
hose pull out the filter.
Then use a brush to clean the
filter.
Caution
• Before cleaning the filter, the impurities in the water supply hose should be removed.
How to clean Multi clean Filter
1
Push the upper part of
multi-clean filter down
and pull forward.
• Without multi clean filter, laundry may get damaged.
Clean multi clean filter as often as possible. (Foreign objects accumulation may cause smell and filtering
performance will be worsened.
In order to reduce lint generation,
- laundry which creates lint easily should get turned inside out.
- Wash load sorted by color.
2
4
2
Open the lid and remove
lint and then wash out.
Turn off the power before pulling
out the cord.
Replace the filter after cleaning it.
3
Close the lid and at first get it back
to tub. First insert the lower part of
filter to washer tub and pull it down
until a click sounds.