Operating The Washer - LG WM2010C sERIES User's Manual & Installation Instructions

Hide thumbs Also See for WM2010C sERIES:
Table of Contents

Advertisement

Available languages

Available languages

OPERATING THE WASHER

Once you have loaded the washer and added
laundry products (detergent, bleach, and/or
fabric softener):
1
Press the ON/OFF button to turn on the
washer. The lights around the cycle
selector knob will illuminate.
2
Turn the cycle selector knob to the desired
cycle. The display will show the
preset Rinse/Wash Temperature,
Spin Speed, Soil Level, and
Option settings for that cycle.
3
If you would like to change the settings
for that cycle, press the appropriate cycle
setting button(s) until the indicator light
for the desired setting is lit.
NOTE: To protect your garments, not every
wash/rinse temperature, spin speed, soil
level, or option is available with every cycle.
4
Select any additional cycle options, such
as PRE-WASH, STAIN
CYCLE, or EXTRA RINSE, by
pressing the OPTION button
until the desired option is lit.
NOTE: To protect your
garments, not every wash/
rinse temperature, spin
speed, soil level, or option is
available with every cycle.
H O W TO U S E
5
Press the START/PAUSE button to begin
the cycle. The door will latch,
the display will change, and
the washer will calculate the
estimated time remaining. Once
the washer has calculated the estimated
total cycle time, the washer will start.
To pause the cycle at any time, press
START/PAUSE.
NOTE: The cycle time displayed may
appear much longer than that of a top-
loading washer. The displayed time is for the
complete cycle, rather than just the agitation
portion of the cycle, as is typically shown on
a top-loading washer.
NOTE: If the temperature in the washer is
too high, the door cannot be unlocked until
the washer has cooled. If the water level is
too high, select the DRAIN & SPIN to drain
excess water. Do not try to force the door
open.
Washing time can be reduced significantly
for small or lightly soiled loads by selecting
the Speed Wash cycle and setting the Soil
Level button to Light.
6
When the load is finished, the beeper (if set)
will sound and the door will unlock.
Remove damp clothes from the washer
immediately. Check under the door seal
for small items.
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents