Table of Contents
Advertisement
38
Operating
Programme Guide (Digital
program only)
The Program Guide contains schedule and program
information for digital programs. They also provide
local over-the-air programs information including
conventional digital programs. Use the Program
Guide to find programs easily and conveniently
and to view schedule and descriptive program
information for the programs.
To Display the Program Guide
Press the GUIDE button on your remote control.
4
To Exit the Program Guide
Press the BACK (1) button to return to the last
program you tuned to.
To change guide menu
The guide screen provides two search menus. Press
blue colored (B) button when the Programme
Guide is displayed.
Now/Next: The screen shows now and next
programs.
8 Days: The screen shows programs within 8
days.
To navigate through programs on
the Guides
Use W/S/A/D on your remote control to
navigate the guide screen.
You can move faster through programs by scrolling
page-by-page with the PR (-/+) buttons on the
remote control. Each button stroke scrolls one page
up or down.
To tune to another current channel
Use W/S/A/D to select a current channel then
press ENTER (b). You can watch the channel.
To display the Full Information
window
You can view the detail information for the
highlighted program. Press INFO/MENU (m) to
display detail information window. To exit the detail
information window, press ENTER (b) again.
To change date
When the Program Guide with 8 days is displayed,
you can also change the date of the Program Guide
by pressing the green colour button then use A/
D to select a date.
After setting favorite channels from the PR list, you
can use the yellow button to toggle between [All]
and [Favorite] channel list.
Timer Recording with Program
Guide
You can set a timer record using program guide
with 8 days.
1. Display Program Guide with 8 days.
2. Select a program then press red colour (R)
button. The red timer icon will be displayed and
the program will be memorized by the recorder.
You can check the programming on the Timer
Record List menu (see page. 40-41).
3. To release the timer recording, select the
program then press red colour (R) button. The
red timer icon disappears.
Advertisement
Table of Contents
