Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Airlink101 AGIGACB
Summary of Contents for Airlink101 AGIGACB
- Page 1 Gigabit Cardbus Adapter Model # AGIGACB User’s Manual Ver. 1A...
-
Page 2: Table Of Contents
Table of Contents 1. Introduction ....................3 1.1 System Requirements.................3 2. Installing Hardware ..................3 3. Installing Driver ..................4 3.1 Windows 98SE..................4 3.2 Windows Me ..................7 3.3 Windows 2000 ..................9 3.4 Windows XP..................12 4. Verifying Installation ................14 5. Specifications ..................15 6. Technical Support ..................15... -
Page 3: Introduction
1. Introduction The Gigabit Cardbus Adapter comes with a 32-bit bus architecture and full-duplex capability which allows for an unmatched high-speed network performance. By providing smooth connections to 10 Mbps, 100 Mbps and Gigabit Ethernet environments, the Gigabit Cardbus Adapter is the ultimate solution for the Cardbus equipped laptops. -
Page 4: Installing Driver
Step 3 Connect one end of the Ethernet cable into an available switch/router port and connect the other end of the cable into the RJ-45 port of the Cardbus. Step 4 Follow the instructions in the next section to install the drivers. 3. - Page 5 Step 2 Insert the provided Driver CD into the CD-ROM drive. Step 3 Select Search for the best driver for your device (Recommended) and click Next. Step 4 Select Specify a location and click Browse. Browse to the CD-ROM drive and select the Win98 folder.
- Page 6 Step 5 Click Next to install the driver. Step 6 Insert the Windows 98SE CD and click OK to continue. Step 7 Click Finish. Step 8 Click Yes to restart the computer and complete the driver installation.
-
Page 7: Windows Me
3.2 Windows Me Step 1 At the Add New Hardware Wizard, select Specify the location of the driver (Advanced) and click Next. Step 2 Insert the provided Driver CD into the CD-ROM drive. Step 3 Verify Search for the best driver for your device (Recommended) is selected. Select Specify a location and click Browse. - Page 8 Step 4 Click Next to install the driver. Step 5 Click Finish to complete the installation.
-
Page 9: Windows 2000
3.3 Windows 2000 Step 1 At the Found New Hardware Wizard, click Next. Step 2 Insert the provided Driver CD into the CD-ROM drive. Step 3 Select Search for a suitable driver for my device (recommended) and click Next. - Page 10 Step 4 Select Specify a location and click Next. Step 5 Browse to the CD-Rom drive and select the Win2000 folder and click OK.
- Page 11 Step 6 Click Next to install the driver. Step 7 Click Yes at the Digital Signature Window. Step 8 Click Finish to complete the driver installation.
-
Page 12: Windows Xp
3.4 Windows XP Step 1 At the Found New Hardware Wizard, select Install from a list or specific location (Advanced) and click Next. Step 2 Insert the provided Driver CD into the CD-ROM drive. Step 3 Verify Search for the best driver in these locations is selected, and select the Include this location in the search check box and click Browse. - Page 13 Step 4 Click Continue Anyway at the Windows Logo Testing prompt. Step 5 Click Finish to complete the driver installation.
-
Page 14: Verifying Installation
4. Verifying Installation Follow the steps below to verify if the Cardbus is installed successfully. Step 1 Right-click on My Computer from your desktop and choose Properties. Step 2 Select the Device Manager tab. (For Windows 2000/XP, select the Hardware tab first then click on Device Manager). -
Page 15: Specifications
AirLink101. All other product or service names are the property of their respective holders. AirLink101 products are protected under...
Need help?
Do you have a question about the AGIGACB and is the answer not in the manual?
Questions and answers