Airlink101 AGIGACB Quick Installation Manual

Quick Installation Guide

Gigabit Cardbus Adapter
Section 1
1

Installing Hardware

Step 1 Turn on the computer and wait for Windows to boot up.
Step 2 Insert the Cardbus firmly into the Cardbus slot with the LED indicators
facing up.
Step 3 Connect one end of the Ethernet cable into an available switch/router port
and connect the other end of the cable into the RJ-45 port of the Cardbus.
Step 4 Follow the instructions in the next section to install the drivers.
Model # AGIGACB
Package Content:
• Gigabit Cardbus Adapter
• Driver CD
• Quick Installation Guide
Ver. 1A
Section 2
Note: The following steps and screen shots are for Windows XP. Steps for other
Windows operating systems are included in the User's Manual on the Driver CD.
Step 1 At the Found New Hardware Wizard, select Install from a list or
specific location (Advanced) and click Next.

Installing Driver