LG Fridge-freezer User Manual page 21

4.
Destroy the two small caps on the front of the cover front
with a screw driver, then separate the screw
the cover front . Move the wire
23
front and the screw. Take the small caps out of the alternate
23
bag, then install the small caps.
5.
Remove the small cap
separate the small cap
corresponding position on the right. Install the small cap ,
then install the small cap on the corresponding positionon
the right.
6.
Install the hinge lower
the hinge middle 18 . Separate the cap
Install the refrigerator door , take the hinge upper
alternate bag and install it on upper left. Pull out the wire
from the individual holes and connect these cables. Take the
small caps out of the alternate bag, then install the small
31 32
caps. Install base cover
7.
Separate the cap on the right side of the door, then installit
33
into the left screw hole (you can see this hole after the left handle
is removed). Install the handle and the screw which previously
separated on the corresponding position on the right. (The
hidden handle does not need this procedure) Then Installation
completed.
Note
Reversing the doors is not covered by the warranty.
24
to left, install the cover
of the refrigerator door
27
. Move the cable 29 from left to the
28
27
and the freezer door
9 11
on the upper left.
34
19
.
6
22
23
and . Separate
, then
19
28
, then install
out of the
30
26 29
25
26
34
23
24
28
29
27
19
17
18
11
9
5
6
32
31
30
26
29
33
3
2
33
3
2