Table of Contents
Advertisement
scart and rf
SCART is a
recommended option
because its use
improves the quality of
the picture.
If connecting to a stereo
TV you will need a
SCART cable.
There are several types
of SCART cables, fully-
wired and others.
If you use a SCART
cable, you must also
connect the RF cable.
GETTING EVERYTHING READY
Connect the cables as indicated in the diagram (below), using
connect cables
the TV Aerial Cable, the
Mains Power
Cord
Mains Outlet
You are now ready to start the Three-Step Quick Start which begins on the next
page.
You have two ways for initial setup of your new VCR depending upon the
connection method and your TV.
If you have connected only the RF cable,
perform Auto Setup (
If you have connected both the RF cable and the fully-
wired 21-pin SCART cable, and if your TV offers T-V Link,
etc.*,
perform Preset Download (
* Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK,
Q-Link, DATA LOGIC or NexTView Link via fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may differ by
system.
(continued)
RF Cable
and the
21-pin SCART Cable
RF Cable
(provided)
21-pin SCART Cable
(not provided)
ENTREE/DECODEUR
AV2
IN/DECODER
pg. 10).
pg. 11).
welcome to jvc
(not provided).
TV Aerial
Cable
(not
provided)
ENTREE
CONTROLEUR SAT
ANT. IN
SORTIE
SAT CONTROL
OUT
ENTREE/SORTIE
AV1
ANTENNE
R
IN/OUT
SORTIE
RF OUT
AUDIO
L
Back of VCR
9
Advertisement
Chapters
Table of Contents
