Specifications - JVC RX-5042S Instructions Manual

Specifications

Amplifier
Output Power
At Stereo operation
Front channels: 100 W per channel, min. RMS, driven into 8
Ω, at 1 kHz with no more than 0.8% total
harmonic distortion (IEC268-3/DIN).
At Surround operation
Front channels: 100 W per channel, min. RMS, driven into
8 Ω, at 1 kHz with no more than 0.8% total
harmonic distortion.
100 W, min. RMS, driven into 8 Ω, at 1 kHz
Center channel:
with no more than 0.8% total harmonic
distortion.
Surround channels: 100 W per channel, min. RMS, driven into
8 Ω, at 1 kHz with no more than 0.8% total
harmonic distortion.
Audio
Audio Input Sensitivity/Impedance (1 kHz)
CD, TAPE/CDR, VCR, TV SOUND, DVD:
Audio Input (DIGITAL IN)*
Coaxial DIGITAL 1 (DVD):
Optical DIGITAL 2 (CD):
–21 dBm to –15 dBm (660 nm ±30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS
Digital Surround (with sampling frequency—32 kHz,
44.1 kHz, 48 kHz)
Recording Output Level
TAPE/CDR, VCR:
Signal-to-Noise Ratio ('66 IHF/DIN)
CD, TAPE/CDR, VCR, TV SOUND, DVD:
Frequency Response (8 Ω)
CD, TAPE/CDR, VCR, TV SOUND, DVD:
Equalization (5 bands)
63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz:
220 mV/47 kΩ
0.5 V(p-p)/75 Ω
220 mV
87 dB/62 dB
20 Hz to 50 kHz (+1 dB, –3 dB)
±8 dB (in 2 dB steps)
Video
Video Input Sensitivity/Impedance
Composite video
DVD, VCR:
Video Output Level
Composite video
VCR, MONITOR OUT:
Synchronization:
Signal-to-Noise Ratio:
FM tuner (IHF)
Tuning Range:
Usable Sensitivity
Monaural:
50 dB Quieting Sensitivity
Monaural:
Stereo:
Stereo Separation at OUT (REC):
AM (MW) tuner
Tuning Range:
General
Power Requirements:
Power Consumption:
Dimensions (W x H x D):
Mass:
Designs and specifications are subject to change without notice.
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
Negative
45 dB
87.50 MHz to 108.00 MHz
17.0 dBf (1.9 µV/75 Ω)
21.3 dBf (3.2 µV/75 Ω)
41.3 dBf (31.8 µV/75 Ω)
35 dB at 1 kHz
522 kHz to 1 629 kHz
AC 230 V , 50 Hz
210 W (at operation)
1.5 W (in standby mode)
435 mm x 146.5 mm x 369.5 mm
7.5 kg
35