Table of Contents
Advertisement
EN
To create a Sooloos system
The DSP520/640 loudspeakers can be used in conjunction
with an 818 Reference Audio Core to make a superb Sooloos
system.
You can control music from the 818 Reference Audio Core, or
browse and control music using the Sooloos application on an
iPad, iPhone, or iPod Touch, or the Control:PC/Control:Mac
application on a computer.
•
Connect the Network sockets from the Media Core 200 and
the 818 Reference Audio Core to LAN network connections
on your Router, using network cables.
•
Make sure the WAN/Internet port on the Router is connected
DSP520 – Slave
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
Meridian 818 Reference Audio Core
MERIDIAN
SPEAKERLINK
RJ45 cable
to the rest of your network, or to your Cable/DSL Modem.
•
Connect the upper SpeakerLink output from the 818
Reference Audio Core to the Master DSP520/640
SpeakerLink input, using an RJ45 cable.
•
Connect the lower SpeakerLink output from the 818
Reference Audio Core to the SpeakerLink input of the Slave
DSP520/640, using an RJ45 cable.
•
Make sure the Channel selector on each DSP520/640 is set
to the Left position on the front of the left loudspeaker and to
the Right position on the front of the right loudspeaker.
For information on configuring your Media Core 200 please
refer to the Media Core 200 User Guide .
Media Core 200
Router
Internet
NETWORK
SPEAKERLINK
SOOLOOS
OUT
NETWORK
RJ45 cable
DSP520/640 User Guide
DSP520 – Master
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
Advertisement
Table of Contents
