Introduction; Safety Information; Cleaning And Maintenance - Packard Bell LC700 User Manual

1. I
NTRODUCTION
This manual contains instructions for installing and operating the LC700 Monitor.
LC700 Monitor features:
• 17" diagonal (16" viewable) 0.236 mm horizontal dot pitch CDT
• Supports high screen refresh rates and full scan flicker-free picture quality
• Includes On Screen Display menus for user control
• 100-240V AC input voltage
• VESA DPMS (Display Power Management Signalling)
• VESA DDC1/2B compatibility
2. S I
AFETY NFORMATION
When you set up and use your display unit, follow the safety instructions below.
Do not use the display unit in humid environments like bathrooms, damp cellars,
swimming pools, etc.
This equipment must be connected to an earthed outlet close to the display unit
and accessible in case you need to disconnect the display.
Never insert objects into the openings on the outside of the device as you can
come into contact with live electrical components. This can cause fire or give
strong electrical shocks.
Slots in the cabinet are provided for ventilation. Do not block the ventilation slots
in the display unit cabinet.
Do not under any circumstances open the display unit cabinet.

Cleaning and Maintenance

• To avoid risk of electric shock, do not disassemble the display unit cabinet.The unit is not
user-serviceable. Remember to unplug the display unit from thepower outlet before cleaning.
• Do not use alcohol (methyl, ethyl or isopropyl) or any strong solvent. Do notuse thinner
or benzene, abrasive cleaners or compressed air.
• Do not wipe the screen with a cloth or sponge that could scratch the surface.
• To clean your antistatic screen, use water and a special micro fibre screencleaning tissue
used in optical lens cleaning, or lightly dampen a soft, cleancloth with water or a mild
detergent.
• To clean display unit cabinet, use a cloth lightly dampened with a milddetergent.
• For transportation of the monitor, the swivel base must be removed.
3