Stand Installation; Back Cover For Wire Arrangement - LG PLASMA TV Owner's Manual

PREPARATION

STAND INSTALLATION

■ Image shown may differ from your TV
■ When assembling the desk type stand, check
whether the bolt is fully tightened. (If not tightened
fully, the product can tilt forward after the product
installation.) If you tighten the bolt with excessive
force, the bolt can deviate from abrasion of the
tightening part of the bolt.
Carefully place the TV screen side down on a
1
cushioned surface to protect the screen from
damage.
2
Assemble the parts of the Stand Body with
the Stand Base of the TV.
M5x14.5
3
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in the
back of the TV.
Rear
10
Stand Body
Stand Base
W h e n a s s e m b l i n g
Front the stand, make sure
t o d i s t i n g u i s h a n d
assemble the front
and rear side of the
stand correctly.
BACK COVER FOR WIRE
ARRANGEMENT
■ Image shown may differ from your TV.
1
Install the Power Cord Holder and Power
Cord. It will help prevent the power cable
from being removed by accident.
2
Gather and bind the cables with the Cable
Holder.
M4X26
!
?
CAUTION
► Do not move the TV by holding the Cable Holder &
Power Cord Holder, as the Cable holders may break,
and injuries and damage to the TV may occur.
Cable Holder