Software Update (In Digital Mode Only) - LG 26LC4D Series Owner's Manual

WATCHING TV /PROGRAMME CONTROL
SOFTWARE UPDATE
(IN DIGITAL MODE ONLY)
Software Update means software can be downloaded through
the digital terrestrial broadcasting system.
1
Press the MENU button and then
select the SETUP menu.
2
Press the
Software update.
3 Press the
Off or On.
• If you select On, a user confirm message box will be
displayed to notify that new software is found.
4
Press the EXIT button to return to normal TV viewing.
* When setting "Software Update"
40
D
button and then
G D or E
button and then
G D or E
Occasionally, a transmis-
sion of updated digital
software information will
result in the following
menu on the TV screen.
Select the YES using the
F or
you see the following
picture.
After Software Update is
completed, the System
takes about one minute to
restart.
button to
or E
button to select
button to select
- During Progress of Software Update,
please note the following:
• The power of the set must not be interrupted.
button and when
G
• The set must not be switched off.
• The antenna must not be disconnected.
• During this time, you should not switch off
the power to the set.
• At this time, you should not work power
On/Off.
• After Software Update, you can confirm the
updated software version in Diagnostics
menu.
BACK INFO i
MENU
EXIT
OK
FAV
VOL
SETUP
O
Auto Tuning
PICTURE Manual Tuning
O
Programme Edit
AUDIO
O
5V Antenna Power
TIME
O
Software Update
OPTION
O
Diagnostics
SCREEN CI Information
O
Move Prev.
MENU
Auto Tuning
Manual Tuning
Programme Edit
5V Antenna Power
Software Update
Off
G
Diagnostics
On
CI Information
GUIDE
PR
1
2 3