Software Update (In Digital Mode Only) - LG 32LG50 SERIES Owner's Manual

SOFTWARE UPDATE
(IN DIGITAL MODE ONLY)
Software Update means software can be downloaded through
the digital terrestrial broadcasting system.
1
Press the MENU button and then
select the SETUP menu.
Press the button and then
2 G
Software update.
Press the button and then
3 G
On or Off.
• If you select On, a user confirm message box will be
displayed to notify that new software is found.
4
Press the EXIT button to return to normal TV viewing.
* When setting "Software Update"
5 Occasionally, a transmission of updated digital
software information will result in the OSD (On
Screen Display) on the TV screen.
6 Select YES using the
The OSD will be disappeared on the TV screen, and
you can watch the current TV viewing.
When you change the TV to standby mode using the
G
POWER button while watching the TV, it will be started
Software update.
Turn on the TV in standby mode. The OSD is displayed
G
on the screen based on Software update
circumstances.
After the Software update is complete, the System
G
takes about one minute to restart.
- During Progress of a Software Update, please note the following:
• Power to the TV must not be interrupted.
• The TV must not be switched off.
• The antenna must not be disconnected.
button to
D or E
button to select
D E
or
button to select
D or E
button.
F or G
Auto Tuning
Manual Tuning
Programme Edit
5V Antenna Power
Booster
Software Update
Diagnostics
?
• After Software Update, you can confirm the updated
software version in Diagnostics menu.
BACK INFO i
MENU
EXIT GUIDE
OK
FAV
VOL PR
MUTE
1 2 3
SETUP
G
Auto Tuning
Manual Tuning
PICTURE
O
Programme Edit
AUDIO
O
5V Antenna Power
TIME
O
Booster
OPTION
O
Software Update
Diagnostics
Prev.
MENU
1
Off
G
On
2 3
New software(ver. F.FF.F) is available. Do you
want to download?
Yes No
5 6
37