Selecting A Source; Adjusting The Volume; Checking The Clock; Changing The General Settings - LG LAC6710R Owner's Manual

Selecting a source

Press SOURCE repeatedly to select a source.
The indicator lights up in the following order. TUNER → CD → USB → TUNER...
Note
You cannot select a source if is not ready.

Adjusting the volume

Rotate MUTE/PWR (Press VOLUME
Note
When you turn the unit off, the current volume level is automatically memorized. Whenever
you turn the unit back on, it will operate at the memorized volume level.
Mute
1 Press MUTE/PWR (POWER/
2 To cancel it, press again.

Checking the clock

You can see the clock pressing DISP (DISP. on the remote control).

Changing the general settings

1 Press MENU (Press and hold MENU/SEL on remote control) so that one of menu items
appears.
2 Press MENU (MENU/SEL on remote control) to scroll between menus.
AF ON t REG ON t TA ALARM t PI SOUND t DEMO ON t BEEP 2ND
3 Rotate MUTE/PWR clockwise or unclockwise to select one of the settings specified
belows. (Press VOLUME
4 Press and hold MENU (MENU/SEL on remote control) to finish the setting.
AF(Alternative frequency) ON / OFF
When the reception quality drops, the tuner automatically changes to another station in the
network, broadcasting a better reception quality, using the PI and AF codes.
AF ON :
wherever you drive, you can continue to listen to the same program without interruptions.
AF OFF :
Only station name will be displayed. In case of poor reception no alternative station can
be used.
REG (Region) ON / OFF
REG ON :
The unit switches to another station, within the same network, broadcasting the same
program when the receiving signals from the current station become weak.
REG OFF :
The unit switches to another station, within the same network when the receiving signals
from the current station become weak. (This mode, the program may differ from the one
currently received.)
TA(Traffic Announcement) ALARM / SEEK
TA ALARM :
When a newly tuned station has no TP information for 5 seconds, a double beep sound is
output.
TA SEEK :
When the newly tuned station does not receive TP information for 5 seconds, the receiver
retunes to the next station which has the same PI as the last station, but has the TP
information.
on the remote control) to adjust the sound level.
on the remote control) to cut the sound.
on the remote control.)
9