Troubleshooting Guide; Problems Turning On The Telephone; Problems Making And Answering Telephone Calls - Oregon Scientific ThermoDECT TD338 User Manual

ENG
Car game description
When the game starts, your car is moving to the left; the computer-driven car is
moving to the right.
When you reach the gap, press the appropriate key to move to another row and
avoid crashing into the computer car.
Press the keys to move between the rows as you try to clear all the dots. The
computer car will try to crash into you as you proceed. Press 6 if you need to
break.
Continue playing until you clear all the dots.

TROUBLESHOOTING GUIDE

This section includes a list of frequently asked questions for problems you may encounter with your
ThermoDECT telephone. If your telephone is not operating as you think it should, check here before
arranging for servicing.

Problems turning on the telephone

"I cannot hear a dial tone or get the LCD display to work."
Check to make sure the telephone is properly set up:
• Is the base unit plugged into the telephone line and AC power source? See page 6 for instructions.
• Is the AC power source turned on at the socket?
• Are the batteries properly installed in the handset? See page 6 for instructions.
If the problem persists, please contact our help line following the instructions on our website (www.
oregonscientific.com). Never attempt to repair or adjust the telephone yourself. This can cause damage
to the unit, electrical shock, and may invalidate your warranty.
Problems making and answering calls
"I cannot make or answer calls."
• Try moving the handset closer to the base unit.
• If this doesn't work, try a different position for the base unit following the instructions on page 6.
Typically, the higher you place the base unit, the better the reception.
• The battery charge level may be low. The battery life shortens when you use the Speakerphone
(handsfree) mode. Check the LCD display for the low battery warning signal
low, place the handset in the charging cradle of base unit until the battery signal appears full.
• Check the power connection by switching off the power at the main socket, waiting a few
seconds, then switching it back on.
26
. If the battery is