Monitoring The Indoor Temperature; Changing From Celsius To Fahrenheit; Setting And Using The Handset Clock; Selecting 12- Or 24-Hour Display - Oregon Scientific ThermoDECT TD338 User Manual

MONITORING THE INDOOR TEMPERATURE

The indoor temperature is shown on the handset display area, and on the LCD display for the base unit.
You can choose to display the temperature in Celsius or Fahrenheit degrees.

Changing from Celsius to Fahrenheit

To change the temperature display, insert an unfolded paperclip into the C/ F
hole located on the underside of the base unit, as shown in the diagram on
this page. Gently push to toggle the temperature display from one unit of
measurement to the other.

SETTING AND USING THE HANDSET CLOCK

You can change the following time and date settings for the clock display on your handset:
• Time – 12- or 24-hour clock display
• Date – DD/MM (Date/Month) or MM/DD (Month/Date) display
• Current date and time
If you have multiple handsets, you only need to set the time and date on one handset. The alarm can be
set for each handset separately.

Selecting 12- or 24-hour display

To change the handset hour display format:
1. Press the button.
2. Press to select Setup from the options.
3. Press .
4. Press again to select Clock Setting from the options.
5. Press to select Hour Format from the options.
6. Press .
7. Press to select 12 or 24 hours.
8. Press to confirm your selection.
Tip: To return to standby mode, press and hold the

Changing the date format

To change the handset date display format:
1. Press the button.
2. Press to select Setup from the options.
3. Press .
4. Press again to select Clock Setting from the options.
5. Press to select Date Format from the options.
6. Press .
7. Press or to select DD/MM (Date/Month) or MM/DD (Month/Date).
8. Press to confirm your selection.
Tip: To return to standby mode, press and hold the
button.
button.
21
ENG