Grounding Methods To Prevent Electrostatic Damage - HP 20 MODULAR SMART ARRAY User Manual

Electrostatic Discharge

Grounding Methods to Prevent Electrostatic Damage

There are several methods for grounding. Use one or more of the following methods
when handling or installing electrostatic-sensitive parts:
Use a wrist strap connected by a ground cord to a grounded workstation or
computer chassis. Wrist straps are flexible straps with a minimum of 1 megohm
10 percent resistance in the ground cords. To provide proper ground, wear the
strap snug against the skin.
Use heel straps, toe straps, or boot straps at standing workstations. Wear the
straps on both feet when standing on conductive floors or dissipating floor mats.
Use conductive field service tools.
Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an
authorized reseller install the part.
For more information on static electricity, or assistance with product installation,
contact your authorized reseller.
B-2 HP StorageWorks Modular Smart Array 20 User Guide