Do you have a question about the XC 902 GH DC AUS and is the answer not in the manual?
Questions and answers
Barbara toronto
February 26, 2025
I have an XC 902 DC.3 bought in 2005. The heating element no longer works. The brand is no longer sold in China. How can I get a replacement part?
2 comments:
Mr. Anderson
February 26, 2025
You can obtain a replacement heating element for the Ariston XC 902 GH DC AUS by contacting an authorized Ariston service center.
This answer is automatically generated
Barbara
February 26, 2025
@Mr. Anderson
Barbara
February 26, 2025
My cooker is in Beijing China. Ariston is no longer sold in China, and there are no parts available for repair here. Which country is best for me to find a new heating element and have it shipped to me? When we called the new Service Ctr number available to us, they simply replied they couldn’t help us.
1 comments:
Mr. Anderson
February 26, 2025
Australia is the best country to find a new heating element for the Ariston XC 902 GH DC AUS cooker, as the model is designed for the Australian market.
SAFETY PRECAUTIONS Congratulations on choosing an Ariston appliance, which you will find is dependable and easy to use. We recommend that you read this manual for best performance and to extend the life of your appliance. Thank you. 1. This appliance has been designed for private, non- 8.
COOKER DESCRIPTION A Auxiliary gas burner T Timer B Semi-rapid gas burner S Electric oven operation indicator light C Rapid gas burner G Electric oven selector knob (cooking function D DC-DR gas burner selection) R Support Grid for Cookware H Electric oven thermostat knob (temperature M Control Knobs for Gas Burners selection) E Ignitor for Gas Burners...
INSTRUCTIONS FOR USE HOB OPERATION Burner ø Pan Diameter (cm) The burners are fitted with automatic ignition and a A.Auxiliary 6 – 14 thermocouple safety device, which automatically cuts off B.Semi-rapid 15 – 20 the gas from the burner in a few seconds if the flame accidentally goes out during operation.
Page 5
THE "MAXIOVEN" MULTI-FUNCTION OVEN • Grill operation: a high heat output is used for grilling, so that the surface of the food is immediately browned; this The oven offers nine combinations of heating elements; so is particularly indicated for meats which should remain the most suitable combination may therefore be chosen for tender on the inside.
HOW TO KEEP YOUR OVEN IN SHAPE • Never line the bottom of the oven with aluminium foil Important: The appliance should be disconnected from because the buildup of heat will not only impede the the mains supply before starting cleaning operations. cooking process, but could also damage the enamel.
THE ELECTRONIC PROGRAMMER The electronic programmer has the function of automatically switching on the oven (at the required time) and switching it off at the end of the set cooking time. The 4 figure luminous display showing the actual time and the programming times, also shows the current state of the oven by means of the following symbols: Oven on...
PRACTICAL COOKING ADVICE Preheating Cooked well on the inside but sticky on the outside If the oven must be preheated (generally this is the case Use less liquid, lower the temperature, and increase the when cooking leavened foods) the “ventilation” mode cooking time.
COOKING TIPS Cooking times may change according to the nature of the foods, their homogeneity and their volume. When cooking a certain food for the first time, it is advisable to choose the lowest values in the cooking time range given in the table and then increase them if necessary. CONVENTIONAL OVEN COOKING °...
INSTALLATION current standards and regulations. The air must be taken The following instructions are provided for qualified directly from the outside, from an area far from sources of installers so that they may accomplish installation, pollution. The ventilation aperture must have the following adjustment and technical maintenance operations correctly characteristics (fig.8A): and in compliance with current regulations and standards.
Page 11
INSTALLATION Gas supply connection • Check that the appliance is set for the type of gas available and then connect it to the mains gas piping or the gas cylinder in compliance with current regulations and standards. • This appliance is designed and set to work with the gas indicated on the label situated on the actual hob.
ELECTRICAL CONNECTION THE APPLIANCE MUST BE EARTHED the load from the appliance (see rating plate); The hob is designed to work with alternating current at the • the supply system is efficiently earthed according to supply voltage and frequency indicated on the rating plate standards and laws in force;...
Need help?
Do you have a question about the XC 902 GH DC AUS and is the answer not in the manual?
Questions and answers
I have an XC 902 DC.3 bought in 2005. The heating element no longer works. The brand is no longer sold in China. How can I get a replacement part?
You can obtain a replacement heating element for the Ariston XC 902 GH DC AUS by contacting an authorized Ariston service center.
This answer is automatically generated
@Mr. Anderson
My cooker is in Beijing China. Ariston is no longer sold in China, and there are no parts available for repair here. Which country is best for me to find a new heating element and have it shipped to me? When we called the new Service Ctr number available to us, they simply replied they couldn’t help us.
Australia is the best country to find a new heating element for the Ariston XC 902 GH DC AUS cooker, as the model is designed for the Australian market.
This answer is automatically generated