Page 1
Dishwasher Instructions for installation and use...
Page 5
ARISTON DISHWASHER - Instructions for installation and use...
Page 6
4.3psi - 145psi - 0,3 ÷10 bar (30 Kpa÷ 1 MPa) subsequent Power voltage See data plate amendments. • 9 7 / 1 7 / C E T otal absorber power See data plate (Labelling) Fuse See data plate ARISTON DISHWASHER - Instructions for installation and use...
Page 7
Now close the rail stop flaps. Follow the sequence of actions illustrated in figure "F". ARISTON DISHWASHER - Instructions for installation and use...
Page 8
You can cancel just ended or is the wash cycle under way, take in progress, if it care not to scald has only just yourself with the started. hot steam! ARISTON DISHWASHER - Instructions for installation and use...
Page 9
If, on the other hand, the dishes have white streaks, then turn the dosage adjuster down to You can choose from six different positions. It is normally a lower setting. set to 4. ARISTON DISHWASHER - Instructions for installation and use...
Page 10
Special cycle to be used for more delicate items Wash at 52°C which are sensitive to high Rinse at 45°C temperatures. Run cycle Hot rinse at 65°C immediately after use. Drying ARISTON DISHWASHER - Instructions for installation and use...
Page 11
6. disinfects your dishes, washing them at a high t e m p e r a t u r e . ARISTON DISHWASHER - Instructions for installation and use...
Page 12
. allowing water to spill outside the d r a i n . ARISTON DISHWASHER - Instructions for installation and use...
Page 13
Your dishwasher was built in accordance with the strictest international safety regulations. They protect you and your family. Read the instructions and information contained in this manual: they will provide you with useful hints as to installation, use and maintenance safety. To avoid nasty surprises. ARISTON DISHWASHER - Instructions for installation and use...
Page 14
Empty out all glasses and cups. ARISTON DISHWASHER - Instructions for installation and use...
Need help?
Do you have a question about the L 63 and is the answer not in the manual?
Questions and answers