The Control Panel - Hoover Washer Dryer Instruction Book

40002934Eng.qxd 24/04/2005

The Control Panel

Fast Iron
(Repassage
Facile)
Extra Rinse
(Extra
Rinçage)
The programme selector must be returned to the ARRÊT
position to reset the controls between each wash cycle.
Turning the machine on
The machine is turned on by selecting a programme via the programme
selector. This status will be indicated by the STOP indicator light flashing, this
light will continue to flash until the machine has started or the machine is
returned to the ARRÊT position.
Départ/Pause
Départ
After selecting the programme and the required options press the
Départ/Pause button once to start the machine. The STOP light will stop
flashing and DEPART light will illuminate and there will be a short time delay
to the start of the programme while the machine sets the wash parameters for
the selected programme and options. If the duration of the programme you
have selected is shorter than 60 minutes, then the time remaining indicator
will illuminate accordingly. The Porte Sécurisée indicator light will also
illuminate a few seconds after pressing the Départ/Pause button.
13:29 Page 17
Start Delay TEMPS RESTANT
(Départ
Display
Différé)
Start/Pause Open
(Départ/ Door
Pause) (Porte)
Drying Selector
(Choix de
Sechage)
Door Locked Lavage à froid
Indicator
(Porte Sécurisée)
Programme
Selector
(Cold Wash)
17