Table of Contents
Advertisement
OPERATION
• LOUDNESS
Press BND/LOU button (13) to
increase bass output and display will
show "LOUD". Press it again to
release this function.
• SET THE CLOCK
Press and hold DSP button (15), then
press the SKIP/MANU
to change minutes or SKIP/MANU
button (16) to change hours.
• SELECT MODE
Press MODE button (6) to choose
desired listening mode.
(e.g. radio mode to CD mode)
• MUTE
Press MUT button (3) to silence the
receiver. Press it again to release the
mode.
• VACUUM FLUORESCENT DISPLAY
Exhibit current frequency and activated
functions on the display (25).
• EQUALIZATION
Press EQ button (8) to turn on
equalization function and to select
desired audio mode. There are four
kinds of mode as below:
FLAT
CLASSICS
• REMOTE SENSOR
Point the remote control handset to
the remote sensor IR (27).
Press the function keys on the handset
to control the system.
• AUXILIARY INPUT
The unit can be connected to a
portable audio player through the AUX
IN jack (26).
• FLASHING LED
If the front panel does not install in the
main unit, the LED (23) will be flashing.
button (17)
POP
JAZZ
DSP OFF
• RESET
Reset button (24) is placed on the front
panel and must be activated with either
a ball point pen or thin metal object.
The reset button is to be activated for
the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not
operate.
- Error symbol on the display.
Note: If press RESET button (24), the
unit can't work yet, please use a cotton
swab soaked in isopropyl alcohol to
clean the socket on the back of the
front panel.
RADIO OPERATION
• BAND SELECTION
At tuner mode, press BND/LOU button
(13) to select the desired band.
The reception band will change in the
following order:
FM1
• STATION SELECTION
Press SKIP/MANU
SKIP/MANU
activate automatic seek function.
Press for several seconds until
"MANUAL" appeared on the display,
the manual tuning mode is selected.
If both buttons have not pressed for
several seconds, they will retune to
seek tuning mode and "AUTO"
appeared on the display.
• LOCAL/DISTANCE
Press LOC button (2) shortly to select
between local and distant stations.
Local setting for reception of strong
station, and a distant setting for
reception of weaker stations.
8
FM2
FM3
button (16) or
button (17) shortly to
AM
Advertisement
Table of Contents
