Table of Contents
Advertisement
OPERATION
• SET THE CLOCK
• LOUDNESS
Press BND/LOU button (13) to
Press and hold DSP button (15), then
press the SKIP/MANU
increase bass output and display will
to change minutes or SKIP/MANU
show "LOUD". Press it again to
button (16) to change hours.
release this function.
• SELECT MODE
• SET THE CLOCK
Press MODE button (6) to choose
Press and hold DSP button (15), then
desired listening mode.
press the SKIP/MANU
(e.g. radio mode to CD (MP3) mode to
to change minutes or SKIP/MANU
button (16) to change hours.
CDC mode or AUX IN mode)
• MUTE
• SELECT MODE
Press MODE button (6) to choose
Press MUT button (3) to silence the
receiver. Press it again to release the
desired listening mode.
mode.
(e.g. radio mode to CD (MP3) mode to
CDC mode)
• LIQUID CRYSTAL DISPLAY (FOR
• MUTE
LCD VERSION ONLY)
VACUUM FLUORESCENT DISPLAY
Press MUT button (3) to silence the
receiver. Press it again to release the
(FPR VFD VERSION ONLY)
Exhibit current frequency and activated
mode.
functions on the display (25).
• VACUUM FLUORESCENT DISPLAY
• EQUALIZATION
Exhibit current frequency and activated
functions on the display (25).
Press EQ button (8) to turn on
equalization function and to select
• EQUALIZATION
desired audio mode. There are four
Press EQ button (8) to turn on
kinds of mode as below:
equalization function and to select
desired audio mode. There are four
FLAT
CLASSICS
kinds of mode as below:
FLAT
CLASSICS
• REMOTE SENSOR
Point the remote control handset to
the remote sensor IR (27).
• REMOTE SENSOR
Press the function keys on the handset
Point the remote control handset to
to control the system.
the remote sensor IR (27).
• AUXILIARY INPUT
Press the function keys on the handset
The unit can be connected to a
to control the system.
portable audio player through the AUX
• AUXILIARY INPUT
IN jack (26).
The unit can be connected to a
portable audio player through the AUX
• FLASHING LED
IN jack (26).
If the front panel does not install in the
main unit, the LED (28) will be flashing.
• FLASHING LED
If the front panel does not install in the
main unit, the LED (28) will be flashing.
button (17)
button (17)
POP
JAZZ
EQ OFF
POP
JAZZ
DSP OFF
• RESET
• RESET
Reset button (29) is placed on the front
Reset button (29) is placed on the front
panel and must be activated with either
panel and must be activated with either
a ball point pen or thin metal object.
a ball point pen or thin metal object.
The reset button is to be activated for
The reset button is to be activated for
the following reasons:
the following reasons:
- Initial installation of the unit when all
- Initial installation of the unit when all
wiring is completed.
wiring is completed.
- All the function buttons do not
- All the function buttons do not
operate.
operate.
- Error symbol on the display.
- Error symbol on the display.
Note: If press RESET button (29), the
Note: If press RESET button (29), the
unit can't work yet, please use a cotton
unit can't work yet, please use a cotton
swab soaked in isopropyl alcohol to
swab soaked in isopropyl alcohol to
clean the socket on the back of the
clean the socket on the back of the
front panel.
front panel.
RADIO OPERATION
RADIO OPERATION
• BAND SELECTION
• BAND SELECTION
At tuner mode, press BND/LOU button
At tuner mode, press BND/LOU button
(13) to select the desired band.
(13) to select the desired band.
The reception band will change in the
The reception band will change in the
following order:
following order:
FM1
FM1
• STATION SELECTION
• STATION SELECTION
Press SKIP/MANU
Press SKIP/MANU
SKIP/MANU
SKIP/MANU
activate automatic seek function.
activate automatic seek function.
Press for several seconds until
Press for several seconds until
"MANUAL" appeared on the display,
"MANUAL" appeared on the display,
the manual tuning mode is selected.
the manual tuning mode is selected.
If both buttons have not pressed for
If both buttons have not pressed for
several seconds, they will retune to
several seconds, they will retune to
seek tuning mode and "AUTO"
seek tuning mode and "AUTO"
appeared on the display.
appeared on the display.
• LOCAL/DISTANCE
• LOCAL/DISTANCE
Press LOC button (2) shortly to select
Press LOC button (2) shortly to select
between local and distant stations.
between local and distant stations.
Local setting for reception of strong
Local setting for reception of strong
station, and a distant setting for
station, and a distant setting for
reception of weaker stations.
reception of weaker stations.
8
FM2
FM2
FM3
FM3
button (16) or
button (16) or
button (17) shortly to
button (17) shortly to
AM
AM
Advertisement
Table of Contents
