Selecting The Audio Language (Digital Mode) - Zenith C27J28C Operating Manual

Selecting the audio language (DIGITAL MODE)

NOTE:
You can also display the AUDIO
LANGUAGE menu by pressing
"AUDIO" on the remote control.
J33A0621B_EN.indb 31 J33A0621B_EN.indb 31
Selecting the audio language (DIGITAL MODE)
When two or more audio languages are included in a digital signal, you
can select one of the audio language.
To select the audio language
1
Tune the television to the desired program in the digital mode.
2
Press MENU/ENTER. The menu screen appears.
3
Press or to select
menu, then press or
"DIGITAL SETUP".
4
Press . The DIGITAL SETUP menu
appears.
5
Press or to select "AUDIO
LANGUAGE", then press
the AUDIO LANGUAGE menu.
6
Press / or the number buttons (0-7) to select your desired
language, MENU/ENTER
then press
7
Press MENU/ENTER repeatedly until the menu screen is cleared.
(OPTION)
to select
to display
.
31
1/31/08 5:32:08 PM 1/31/08 5:32:08 PM