Advertisement
Countertop
opening dimensions
that
are shown must be used. Given
dimensions provide required clearances.
Mobite home installation:
The
installation of this cooktop must conform
to the Manufactured Home Construction
and Safety Standards, Title 24 CFR, Part
3280 (formerly the Federal Standard for
Mobile Home Construction and Safety;
Title 24 HUD part 280); or when such
standard is not applicable, the Standard
for Manufactured Home Installations
(Manufactured Home Sites, Communities
and Setups), ANSI A225.1 -- latest
edition*, or with local codes.
in Canada, the installation of this cooktop
must conform with the current standards
CAN/CSA-Z240 -- latest edition**, or with
local codes.
1" (2.5 sin} min,
space between
adjacent cooktops
Do eat seal
25" (63.5 crn) min,=
deep caantertop Us
required
,°
Gas Hne apenUeg--
Walh anywhere 5""(12.7 crn)
below endersUdnof
couetertep, Cabinet floor:
anywhere within 6" (15,2 cm)
of rear wall is recommended,
*NOTE: 24" (61 cm) min. clearance if bottom
of wood or metal cabinet is protected by not tess
than 1/4" (0.6 cm) flame retardant mittboard
covered with not tess than No. 28 MSG sheet
steel, 0.015" (0.04 cm) stainless steel, or 0.024"
(0.06 cm) aluminum or 0.020"
(0.05 cm) copper.
30" (76.2 cm) min. clearance between top of
cooking platform and bottom of an unprotected
wood or metal cabinet.
Grounded
outlet --
Locatewithin
24"(61crn)
of right rear
career
of cutout,
15"
(38.1 era)
38"
(76.2 era)
e
o
@
@
13-3/4"
19"
15"
2-1/8"
(34.9crn)
(48.3crn)
(38.1crn)
(5.4crn)
29"
(73.7crn}
35-1/4"
(89.5crn)
42-3/4"
(108.6crn)
19 _
(48.3cm)
19 _
(48.3crn)
19 _
(48.3cm)
30 '_
(78.2cm)
38 _
(91.4crn)
42"
(108.7cm)
2-1/8"
(5.4crn)
2-1/8"
(5.4crn)
2-1/8"
(5.4crn)
2-7/8"
5-5/8"
(7,3cm)
(14,3cm)
5-5/8"
(7:3 cm)
(14,3crn)
(7:3cm)
(14,3cm)
1iq/2"
,7:3cm)
(2&4cm)
Base cabinet size:
CooktopSize
Min. Base Cabinet Reqnired
15" (38.1 cm)
15" (38.1 crn)
30" (76.9 cm)
30" (78.2 crn)
36" (91.4 cm)
36" (91.4 crn)
43" (109.2 cm)
44" (111.8 crn)
If cabinet has a drawer, a 4" (10.2 cm)
depth clearance from the countertop to
the top of the drawer (or other obstruction)
in base cabinet is required. The drawer
depth may need to be shortened to avoid
interfering with the regulator.
Advertisement
